Contents:

Home

Builder/Web_Author

Ground Photos

In-Flight Photos

Instrument Panel

Misc.

Fuel Flow Data

Cooling_Modifications

Article on Mixture and CHT management

Miscellaneous

Valve for shutting down gyros:

This is a picture of the 3/8" barb fitting valve that I installed in the suction lines for the gyros, to enable shutting them down for aerobatic flight.  This is McMaster-Carr P/N 4757K58.

Cowl Off:

Airflow Performance Boost Pump Mounting:

Cracked FAB mounting plate 397 hours.  The Airflow Performance mounting ring to which this plate bolts has a rather sharp edge - the circular witness line of this edge can be seen out the outermost edge of the cracks.  It will be radiused before being reassembled.  The two small lines originating from the center and appearing to be cracks are only grease smears which wiped off after the photo was taken.